Software Available For Schick Sensors; Schick Sensor Product Platforms - Dentsply Sirona Schick 33 User Manual

1.6.

Software Available for Schick Sensors

1.7.

Schick Sensor Product Platforms

4
To benefit from imaging features designed specifically for Schick 33
Sensors, customers will need to upgrade to the following software
versions (CDR DICOM 5 or Sidexis 2.6.1 or higher). These software
versions are fully compatible with Schick Elite Sensors as well, and also
with our other Sensor and USB products.
Schick Elite and Schick 33 Sensors can be detected automatically by
CDR software when connected (depending on your preferences) via Schick
33/Elite USB Interface to a PC workstation. (For more information, refer
to the AutoDetect feature, as described in Section 4.3 on page 22).
Please note that the Schick 33/Elite USB Interface enclosure is
specifically designed for Schick 33 and Elite Sensors and will
accommodate only those Sensor types.
In addition to the USB configurations described in this manual, Schick
33 and Schick Elite Sensors can be used with other product
technologies. This modular approach, designed into Schick Sensor
products, means that they can operate effectively in multiple
environments: in cable-connected USB systems, in wireless systems,
and in Ethernet-based solutions.
The following table summarizes these configurations.
S
ENSOR
Schick 33
Schick Elite
100003870 Rev. 4
S S
CHICK CHICK
33/E W
LITE
(USB) (W
IRELESS
 
 
Schick USB Module and Sensors
S W
CHICK ALL
F A
I I DAPTER
) (E
THERNET


)