Uninstalling The Previous Schick 33/Elite Usb Driver - Dentsply Sirona Schick 33 User Manual

2.3.

Uninstalling the Previous Schick 33/Elite USB Driver

NOTE: Customers will not need to uninstall the previous Schick 33/Elite driver unless prompted by the
software or instructed by customer support.
S 1
TEP
A. Exit CDR DICOM (or other compatible
imaging program).
B. Verify that the USB Interface is NOT
connected to laptop or desktop PC. If
connected, disconnect the USB Interface
by unplugging the USB cable.
C. Click Windows Start > Control Panel
and open the Programs and Features
item.
S 2
TEP
A. Browse for the CDR Elite or Schick Elite
USB Driver and select it. If no entry is
found, close the Control Panel and skip to
Section 2.4 on page 7. Otherwise, continue
with the following steps.
B. If an entry for the CDR Elite or Schick
Elite USB Driver is found, click Uninstall
/ Change.
C. Click Yes when prompted to confirm the
driver uninstallation.
D. After the driver is uninstalled successfully,
close the Control Panel.
E. Continue with the next section to install
the latest USB driver.
6
100003870 Rev. 4 Schick USB Module and Sensors