10. Maintenance
10.1. Visual Inspection
10.2. Damaged Sensor
10.3. Periodic Maintenance
62
Like all electrical equipment, the Sensor and USB Interface require not
only correct use, but also visual inspection prior to operation, and
routine checks at regular intervals. These precautions will help ensure
that the Sensor and USB Interface operate accurately, safely, and
efficiently.
Before operating the system, users shall check it for any signs of
physical damage or defect. If detected, contact your local distributor of
Dentsply Sirona products for further instructions.
In the event of obvious physical damage to the Sensor, customers shall
discontinue use of that Sensor, substitute another Sensor (if available),
and contact their local Schick distributor for further instructions.
Periodic maintenance is performed as needed, but at least once a
month. It consists of various checks performed by the operator or by a
qualified service technician.
Check that the labels are intact, readable, and adhere well
to the surfaces on which they are positioned
Check that all of the cables that connect to the USB
Interface are undamaged
Check that there is no external damage to the USB
Interface which could compromise its ability to operate
safely
100003870 Rev. 4
Schick USB Module and Sensors