Installation; What You Will Need To Complete This; Before You Install The Schick 33/Elite Usb Driver; C Omplete This S Ection - Dentsply Sirona Schick 33 User Manual

2. Installation

2.1. What You Will Need to Complete this Section
2.2.

Before You Install the Schick 33/Elite USB Driver

IMPORTANT! Please do not connect the USB Interface and USB cable to your computer until after
you have installed the device driver. Procedures for installing these files are found on the following pages.
Schick USB Module and Sensors
To expedite installation, please have the following items available:
 Schick 33/Elite USB Interface Driver CD (or download
link from Schick by Sirona website)
 Schick 33/Elite USB Interface to be used with your Schick
system
 USB cable to connect the USB Interface to your PC
workstation: a USB 2.0 A-B cable for Schick 33/Elite
Interfaces (cable supplied separately).
You should also have CDR DICOM 5 Software installed (or other
compatible imaging program)
If you are using a Schick 33/Elite USB Interface for the first time, or if
either is being used on a different PC workstation for the first time,
you will need to install the device driver. You must install this driver
successfully to ensure proper operation of your USB Interface.
If you have a previous version of the driver for the USB Interface,
please uninstall it. Section 2.3 on page 6 describes the driver
uninstallation procedure.
Section 2.4, Installing the Schick 33/Elite USB Driver, on page 7,
describes the driver installation procedure for Windows 7 (installation on
other Windows operating systems is similar).
If you are not sure which operating system is installed on your
computer, right click on My Computer on your desktop and select
Properties. (Pressing the Windows Start (
System Properties.) In Windows 8, swipe in from the right edge of the
desktop screen, tap Search, and type "My Computer". Right click on
My Computer and select Properties.
100003870 Rev. 4

) and Break keys will also display
5