Table 9. Selecting Fixed Or Dynamic Enhancement - Dentsply Sirona Schick 33 User Manual

A F E
PPLY IXED NHANCEMENT
 Not Selected
 Selected*
* Selecting this option by CDR DICOM and Sidexis customers will disable dynamic processing and the
availability of the Sharpen slider, Diagnostic tasks, and Enhancement Modes after the image is presented for
display.
Schick USB Module and Sensors
Referring to the previous image, additional information about the
differences between fixed and dynamic enhancement may be found in
the following table.

Table 9. Selecting Fixed or Dynamic Enhancement

(See Figure 12 for reference)
Applies dynamic processing in CDR Dicom and Sidexis
software.
Enables users to adjust the sharpness slider, to choose
any diagnostic task, and to select a different enhancement
mode AFTER the image is displayed.
This box is unchecked by default.
Applies fixed processing in any imaging software
compatible with Schick 33 sensors.
Enables users to select a specific degree of sharpness, a
particular diagnostic task, and either enhancement mode
BEFORE the image is acquired.
The effects of fixed processing cannot be changed after
image display.
100003870 Rev. 4
R
ESULTS
41