Table 4. Proper Sensor Removal from Sheath (AimRight Autoclavable System)
E
XAMPLES
NOTE: Additional information regarding Sensor usage can be found in the Sensor Care Guide, available
from the schickbysirona.com website.
Schick USB Module and Sensors
1. Begin by pinching the distal end of the
Sensor out of the sheath.
2. As the Sensor is pushed into the wider area
of the sheath, gently slide the sheath away
from the Sensor.
3. Be careful to prevent the Sensor from
falling on the floor.
100003870 Rev. 4
A
CTIONS
15