Table of Contents
Advertisement
5.3
Inverter turn-on procedure
Compatibility
1.
Turn on the DC disconnect (turn to "ON" position, if rapid shutdown device is connected
turn on AC disconnect firstly).
2.
Check for inverter initialization (all five LED indicators are illuminated).
3.
Turn on the dedicated 2-polo 240Vac / 208Vac circuit breaker in the building electrical
service panel (put in closed position).
4.
If there is AC disconnect, turn on the AC disconnect.
5.
Refer to section 6 for setup process that needs to be completed before the inverter can
begin feeding power to the grid.
5.4
Inverter turn-off procedurel
1.
If there is AC disconnect, turn off the AC disconnect.
2.
Turn off the dedicated 2-polo 240Vac / 208Vac circuit breaker in the building electrical
service panel (put in open position).
3.
Turn off the DC disconnect (turn to "OFF" position).
5.5
M Series APP(Android) Manual
5.5.1
Introduction
Delta E Series APP is a mobile application to communicate with inverter system for real-time
status monitoring, system mode management, RMA request upload and daily maintenance via
Bluetooth Low Energy.
5.5.2
Installation
Compatibility
1.
Requires android 4.4 or later.
2.
BLE supported.
3.
Internet over Wi-Fi or Cellular.
Procedure
Search "M Tool" in Google Play, download and install the application.
5.5.3
Connection
Procedure
Step 1.
Open app, allow all the permissions required.
Step 2.
Close guide page, guide page only shows at the first time.
Step 3.
Click on the "search" button to refresh and display device list.
44
Hide quick links:
Advertisement
Table of Contents
