Delta M Series Operation And Installation Manual page 23

Figure 13: Dimension drawing of mounting plate
1. Mount the mounting plate to the wall with at least 4 screws and anchors (Ø 6mm). With 4
screws use 4 holes A or 4 holes B (see Figure 14). You can use the mounting plate as
a template for marking the positions of the boreholes.
2. Tighten the screws firmly to the wall.
Figure 14: Installing the plate and inverter on a wood stud wall
5.91in (150mm)
4.72in (120mm)
9.45in (240mm)
21