Table of Contents
Advertisement
18.2 Lubricating
The machine is equipped with a central oil-wick lubrication system.
The bearings are supplied from the oil reservoir.
For topping off the oil reservoir, only use lubricating oil DA 10 or oil of an
equivalent quality with the following specifications:
• Viscosity at 40 °C: 10 mm²/s
• Flash point: 150 °C
You can order the lubricating oil from our sales offices using the following
part numbers:
Container
250 ml
1 l
2 l
5 l
108
CAUTION
Risk of injury from contact with oil!
Oil can cause a rash if it comes into contact with the
skin.
Avoid skin contact with oil.
If oil has come into contact with your skin, wash the
affected areas thoroughly.
NOTICE
Property damage from incorrect oil!
Incorrect oil types can result in damage to the machine.
Only use oil that complies with the data in the instructions.
ATTENTION
Risk of environmental damage from oil!
Oil is a pollutant and must not enter the sewage
system or the soil.
Carefully collect any used oil.
Dispose of the used oil and oily machine parts in
accordance with national regulations.
Part No.
9047 000011
9047 000012
9047 000013
9047 000014
Service Instructions 878-M PREMIUM - 03.0 - 10/2019
Maintenance
Advertisement
Table of Contents
