Using Departments - Neopost IJ65 Manual

6.
An expenditure value and a number of cycles may be assigned to
a department selected from a list, as described below.
- Press on key
- Select a department, using the arrows or by keying in directly the
- Validate your selection by pressing key
- If the department is protected by a code, enter the code to allow
4124543Y/D
14/03/2007

USING DEPARTMENTS

- In order to use departments, the supervisor must have
selected first the department mode (see paragraph
"Defining departments" in section B).
- The machine is supplied with DEPT OFF. In order to use
departments, select DEPT ON in supervisor mode.
:
DEPT
DEPARTMENTS
ESCAPE
department number via the numeric pad.
access to the department (a PIN can be up to 4 digits).
- Departments sharing the same access code make up a
group.
When you have entered the access code once, you will
not be prompted to enter the access code again within
the same group.
- The last department selected will be proposed by default
when operation is resumed after a standby period or
after the machine power-up.
38 Using departments
1 MARKETING
2 DIRECTION
3 DESIGN
6 RESEARCH
7 COMMUNICATION
8 FACTORY
9 ACCOUNTANCY
OK
IJ850016-38
OK
.