Material; Material Load Diagram - Endress+Hauser Proline Promag 50H Manual

Material

Material load diagram

"
44
• Transmitter housing:
– Compact housing: powder coated die-cast aluminium or stainless-steel field housing (1.4301/304)
– Wall-mounted housing: powder coated die-cast aluminium
• Sensor housing: stainless steel 1.4301/304
• Wall mounting kit (holder panel): 1.4301/304
• Measuring tube: stainless steel 1.4301/304
• Lining material: PFA (USP Class VI; FDA 21 CFR 177.1550; 3A)
• Flanges:
– All connections 1.4404/316L
– Flanges (EN (DIN), ANSI, JIS) made of PVDF
– Adhesive fitting made of PVC
• Ground rings: 1.4435/316L (optional: Alloy C-22, Tantalum)
• Electrodes:
– Standard: 1.4435/316L
– Optional: Alloy C-22, Tantalum, Platinum (up to DN 25 / 1" only)
• Seals:
– DN 2 to 25 (1/12 to 1"): O-Ring (EPDM, Viton, Kalrez), moulded seal (EPDM*, Viton, Silicone*)
– DN 40 to 100 (1½ to 4"): moulded seal (EPDM*, Silicone*)
* = USP Class VI; FDA 21 CFR 177.2600; 3A
Caution!
The following diagrams contain material load diagrams (reference curves) for flange materials with regard to
the medium temperature.
Weld socket to DIN EN ISO 1127, ODT/SMS;
coupling to ISO 228 / DIN 2999 / NPT
Material: 1.4404 / 316L (with O-ring)
[psi] [bar]
45
650
600
40
35
500
30
400
25
300
20
-60 -40 -20
PN 40
0 20 40 60 80 100 120 140 160 180 [°C]
-40 0 100
Proline Promag 50H, 53H
200 300 360 [°F]
Endress+Hauser
A0005586