Inspections When Receiving The Delivery; Checking The Delivery; Checking Shock And Tilt Indicators - Siemens SINAMICS GL150 Operating And Installation Instructions

Preparations for use

4.3 Inspections when receiving the delivery

4.3 Inspections when receiving the delivery
4.3.1

Checking the delivery

The components are assembled on an individual basis. When you take receipt of the delivery,
please check immediately whether the scope of the delivery matches up with the
accompanying documents. No claims relating to defects/items missing from the delivery will
be accepted if they are submitted at a later date.
● Report any apparent transport damage to the delivery agent immediately.
● Immediately report any apparent defects/missing components to your contact partner.
These Operating Instructions are part of the scope of delivery; keep them in a location where
they can be easily accessed.
4.3.2

Checking shock and tilt indicators

The purpose of shock and tilt indicators
The unit is equipped with shock and tilt indicators to monitor for damage during transit. It is
essential that you check the shock and tilt indicators before commissioning the unit.
Tripped shock and tilt indicators
Safe operation of the device is not guaranteed if the shock or tilt indicator has tripped
(responded)
This can result in death, serious injury or material damage.
● If one of the indicators has tripped, do not perform any commissioning.
● Inform the Technical Support. Only specialist Siemens technicians can recommend
See also
Service & Support (Page 137)
56
WARNING
appropriate measures.
SINAMICS GL150 6SL38503UM114PA0Z
Operating Instructions 04/2017