Components That Can Be Destroyed By Electrostatic Discharge (Esd) - Siemens SINAMICS GL150 Operating And Installation Instructions

NOTICE
Data loss
Electromagnetic fields can cause data loss to magnetic or electronic data storage media.
● Therefore, do not carry magnetic or electronic data storage media with you.
Nominated persons in control of electrical installations can find further information on
electromagnetic fields under "Information for persons responsible for plants and systems."
See also
Information for nominated persons in control of an electrical installation (Page 21)
2.6

Components that can be destroyed by electrostatic discharge (ESD)

ESD guidelines
NOTICE
Electrostatic discharge
Electronic components can be destroyed in the event of improper handling, transport, storage,
and shipping.
Pack the electronic components in appropriate ESD packaging; e.g. ESD foam, ESD
packaging bags and ESD transport containers.
To protect your equipment against damage, follow the instructions given below.
● Avoid physical contact with electronic components. If it is essential that you perform work
● Do not place electronic components close to data terminals, monitors or televisions.
● Electronic components should not be brought into contact with electrically insulating
SINAMICS GL150 6SL38503UM114PA0Z
Operating Instructions 04/2017
2.6 Components that can be destroyed by electrostatic discharge (ESD)
on these components, you must wear one of the following pieces of protective gear:
– Grounded ESD wrist strap
– ESD shoes or ESD shoe grounding strips if there is also an ESD floor.
Maintain a minimum clearance to the screen (> 10 cm).
materials such as plastic foil, plastic parts, insulating table supports or clothing made of
synthetic fibers.
Safety information
19