Preparations For Use; Requirements For Installation Location; Inspections When Receiving The Delivery; Scope Of Delivery - Siemens SINAMICS SM150 Operating Instructions Manual

Preparations for use

When carrying out any work, carefully observe the information provided in Chapter "Safety
instructions (Page 15)".
4.1

Requirements for installation location

The cabinet units are suitable for installation in general operating areas (to
DIN EN 60146-1-1 / VDE 558 T11 and DIN EN 50178 / VDE 0160 (IEC 62103), degree of
contamination 2; without conducted contamination). For this reason, SINAMICS devices must
be protected in such a way that they cannot be touched directly when they are being installed
in general operating areas.
The operating areas must be dry and free of dust. The air supplied must not contain any
electrically conductive gas, vapors, or dust which could impair operation.
For information about permissible ambient and installation conditions, see the "Technical data
and drawings" section.
4.2

Inspections when receiving the delivery

4.2.1

Scope of delivery

The scope of delivery includes the following components:
● Power unit, incl. closed-loop control
● Excitation cabinet (for synchronous motors only, can be ordered separately)
● Re-cooling unit (optional)
This documentation relates to the complete system without the re-cooling unit.
SINAMICS SM150 6SL3845-7NN42-2AA3 HBIS Shigang WRM NTM
Operating Instructions Rev.202003051222 3005356504
4
45