Ice Bank Chilling System - Cornelius NITROPRO MINI Service And Preventative Maintenance Manual

Nitropro Mini Service Manual
3.0 SYSTEM OPERATION (Cont.)
3.3 Component Functions (Cont.)

3.3.9 Ice Bank Chilling System

In the base of the unit resides the insulated ice
bank assembly. It is comprised of a refrigeration
unit (in the rear of the enclosure), a water/ice res-
ervoir, an agitator/circulation pump to control ice
formation and circulate cooling water, an ice sen-
sor and a control module, The control module
manages the refrigeration system and the agitator
based on feedback from the ice sensor. Water
from the inlet solenoid is routed through a stain-
less steel coil in the ice bank for chilling. As well,
cooling lines from the circulation pump are routed
into the product cabinet where a fan circulates
chilled air.
Figure 3-16 - Ice Bank Sensor & Agitator Motor
Figure 3-15 - Ice Bank and Controller Module
© 2019, Cornelius Inc. All Rights Reserved - 13 - Publication Number: 548000106SER