Required Tools - Cornelius NITROPRO MINI Service And Preventative Maintenance Manual

Nitropro Mini Service Manual
2.0 BREWER OVERVIEW AND REQUIRED TOOLS (Cont.)

2.3 Required Tools

These tools are required for conducting the vari-
ous procedures in this manual. You may find it
helpful to review the Troubleshooting and Com-
ponent Replacement sections to determine what
additional tools you might prefer to include.
HAND TOOLS
Wrenches - SAE Open-end or Combination
(1/4" through 7/8")
Wrenches - Adjustable
(2" x 6"- 8" Length, Crescent)
Nut Driver Set - SAE
Pliers - Adjustable
Channel-Lock/Knipex-style
Pliers - Needlenose
Flat Screwdriver
3/16"
Phillips Screwdrivers
#2 & #0 (6" Length)
#2 Stubby or Flex-shaft
Diagonal Cutting Pliers
Pick Set - Dental Type
Magnetic Pickup Wand
Cleaning Brushes
Bristle and Wire
Air Pressure Gauge
Capable of 100 psi (689 kPa)
with high-pressure hose and
1/4"push-connect fitting
Hose-Clamp Crimping/Cutting Tool
Oetiker HIP 2800 Es
Publication Number: 548000106SER
ELECTRICAL TOOLS
Multimeter - Digital VOM
1000V/10A ac/dc, milliohm to megohm, millivolt,
auto-ranging, ±2.5% +1 digit accuracy
Temperature Meter & Probe
±2.5% +1 digit accuracy
Cordless Drill or Screwdriver
With Screwdriver Bits / Nut Drivers
Flashlight
Portable Vacuum Cleaner
With hose and crevice tool
SUPPLIES
O-Ring Lubricant/Sealant Food-Grade Silicone
Dow Corning Molykote 111 or equiv.
Solvent - Nonflammable
Teflon Thread-sealing Tape
Lint-free Cloth Rags
- 6 - © 2019, Cornelius Inc. All Rights Reserved