Preface; General; Validity And Liability - KEB COMBIVERT F5 Instruction Manual

1.5...4.0kw 230 v 1.5...7.5kw 400 v
Hide thumbs Also See for COMBIVERT F5:
Table of Contents

Advertisement

1.

Preface

1.1

General

First we would like to welcome you as a customer of the company Karl E. Brinkmann GmbH
and congratulation to the purchase of this product. You have decided for a product on highest
technical level.
The described hard- and software are developments of the Karl E. Brinkmann GmbH. The
enclosed documents correspond to conditions valid at printing. Misprint, mistakes and techni-
cal changes reserved.
The instruction manual must be made available to the user. Before working with the unit the
user must become familiar with it. This especially applies to the knowledge and observance
of the following safety and warning indications. The pictographs used in this instruction man-
ual have following meaning:
Danger
Warning
Caution
Attention
observe at
all costs
Information
Aid
Tip
1.2
Safety instructions
Observe safety and
operating instruc-
tions
Non-observance of the safety instructions leads to the loss of any liability claims. The safety
and warning instructions specified in this manual do not lay claim on completeness. This list
is not exhaustive.
1.3

Validity and liability

The use of our units in the target products is outside of our control and therefore lies
exclusively in the area of responsibility of the machine manufacturer.
The information contained in the technical documentation, as well as any user-specific advice
in spoken and written and through tests, are made to best of our knowledge and information
about the application. However, they are considered for information only without responsibil-
ity. This also applies to any violation of industrial property rights of a third-party.
Selection of our units in view of their suitability for the intended use must be done generally
by the user.
Is used, if life or health of the user is in danger or if substantial
damage to property can occur.
Is used, if a measure is necessary for safe and trouble-free
operation.
Is used, if a measure simplifies the handling or operation of
the unit.
Precondition for all further steps is the knowledge and obser-
vance of the safety -, EMC- and operating instructions (Part
1 „Before Starting" 0000NEB-0000").This instruction is pro-
vided with the unit or by download of www.keb.de.
Preface
GB - 5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Combivert f6

Table of Contents