Preface; General; Validity And Liability - KEB COMBIVERT F6 Instruction Manual

1.

Preface

1.1

General

The described hard- and software are developments of the KEB Automation KG. The en-
closed documents correspond to conditions valid at printing. Misprint, mistakes and technical
changes reserved.
The instruction manual must be made available to the user. Before working with the unit the
user must become familiar with it. This especially applies to the knowledge and observance
of the following safety and warning indications. The pictographs used in this instruction man-
ual have following meaning:
Danger
Warning
Caution
Attention
observe at
all costs
Information
Aid
Tip
Non-observance of the safety instructions leads to the loss of any liability claims. This list is
not exhaustive.
1.2

Validity and liability

The use of our units in the target products is outside of our control and therefore lies
exclusively in the area of responsibility of the machine manufacturer.
The information contained in the technical documentation, as well as any user-specific advice
in spoken and written and through tests, are made to best of our knowledge and information
about the application. However, they are considered for information only without responsibil-
ity. This also applies to any violation of industrial property rights of a third-party.
Selection of our units in view of their suitability for the intended use must be done generally
by the user.
Tests can only be done within the application by the machine manufacturer. They must be
repeated, even if only parts of hardware, software or the unit adjustment are modified.
Unauthorised opening and tampering may lead to bodily injury and property damage and
may entail the loss of warranty rights. Original spare parts and authorized accessories by the
manufacturer serve as security. The use of other parts excludes liability for the consequences
arising out of.
The suspension of liability is especially valid also for operation interruption loss, loss of profit,
data loss or other damages. This is also valid, if we referred first to the possibility of such
damages.
If single regulations should be or become void, invalid or impracticable, the effectivity of all
other regulations or agreements is not affected.
Is used, if life or health of the user is in danger or if substantial
damage to property can occur.
Is used, if a measure is necessary for safe and trouble-free
operation.
Is used, if a measure simplifies the handling or operation of
the unit.
Preface
GB - 5