Programming Page - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions

Programming Page The page appears as follows:
83 | © 2013 ABB | 1SDH001000R0002 - L7804
S(V) Protection
S2(V) Protection
Confirm
Figure 82
The following table provides a description of the various areas of the page:
Pos. Description
A Name of the page.
B List of changes made.
Confirm key: confirms the changes (programs the release), and opens the
C
Menus page.
D Cancel key: cancels the changes, and opens the Menus page.
Modify key: it keeps the changes and opens the menu with tick symbols, for
E
correction of the changes or to make other changes.
NOTE: if the changes are confirmed:
• The Menu page is opened.
• For approximately 3 seconds, the message "Parameters updated" appears.
A
Programming
Abort Modify
Ekip Touch protection release | 8 - Setting the parameters
ABB | SACE Emax 2
B
C
D
E