Ekip Com Profibus Modules; Description; Compatibility And Power Supply; Aup Auxiliary Contacts - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions

7 - Ekip Com Profibus modules

Description The Ekip Com Profibus is a communication accessory module, that integrates the circuit-
Compatibility and power supply The modules can be installed in the presence of Ekip Touch, Hi-Touch, G Touch, and G Hi-
AUP auxiliary contacts The modules are always supplied with dedicated AUP auxiliary position contacts, which in the
Ekip RTC contact The modules are always supplied with an Ekip RTC auxiliary contact, that supplies the release
197 | © 2013 ABB | 1SDH001000R0002 - L7804
breaker in an industrial remote supervision and control network.
It can be connected to a network RS-485 with protocol of Profibus communication, and allows
of:
• Connect the releases as slaves to the network, with dialog functionality.
• Command opening and closing of the circuit-breaker remotely.
• Provide information on the state of the circuit-breaker (open, closed, tripped).
• If connected to a circuit-breaker in withdrawable version, detect the connected/extracted.
Remote opening and closing of the circuit-breaker can be performed only if the circuit-breaker
is equipped with an Ekip Com Actuator module (see page 219).
For applications in which a high network reliability is necessary, the module can be installed
along with the corresponding Redundant module.
The Redundant module is identical in terms of specifications and installation methods, but its
wiring is different to the first one.
IMPORTANT: on the same circuit-breaker, a single Ekip Com Profibus, and a
single Ekip Com Profibus Redundant can be installed.
Touch releases, and require the presence of an Ekip Supply module in the first slot of the
circuit-breaker terminal box.
case of a withdrawable circuit-breaker supply the inserted/extracted signal of the moving part
from the fixed part.
The assembly assures that the position signalling is also maintained with the moving part
withdrawn.
IMPORTANT: in the presence of multiple communication modules, only one
of these can be connected to the AUP contacts.
with the signal indicating circuit-breaker ready to receive a close command.
ABB | SACE Emax 2
Electronic accessories | 7 - Ekip Com Profibus modules