Diagnosis Bar - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions
Hide thumbs
Also See for SACE Emax 2 Series:
Table of Contents
Advertisement
Diagnosis bar. The diagnosis bar is present in the main page and the level 2 pages, along the lower side of
58 | © 2013 ABB | 1SDH001000R0002 - L7804
the display, and has two functions:
• Show the messages present.
• Open the page Alarm List.
NOTE: the diagnosis bar is not present in the menus or in the pages accessible from
these
The bar appears as follows:
TC disconnected
Figure 66
The following table provides a description of the various areas of the bar:
Pos.
Description
It shows the type of message:
•
Alarm.
•
Warning, error, or prealarm.
A
•
Information.
•
Active delay.
B
It displays the messages alternatively, and in succession.
C
ABB logo.
The Alarm List it can be opened, if there are messages, by touching the diagnosis bar in the
message display area (on the display, at the bottom left).
Ekip Touch protection release | 1 - Layout of the interface
ABB | SACE Emax 2
Advertisement
Table of Contents
