Components Of The Interface - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions

Components of the interface The operator interface for the Ekip Touch releases appears as follows:
56 | © 2013 ABB | 1SDH001000R0002 - L7804
Figure 65
The following table provides a description of the parts of the interface:
Pos. Description
A Touchscreen display.
Power status LED, green. The possible states are:
B • Off: power supply absent.
• On, fixed or flashing: power supply present, and release on.
C Warning LED, yellow.
D Alarm LED, red.
E HOME key: opens the main page, or the start page.
iTEST key. If the main page or a level 2 page is displayed (see below), pressing it
displays the following pages in succession:
• List of Alarms, if there are any messages present.
F • With information on the Mainboard and release.
• With information on the circuit-breaker.
• Last opening, with information on the last opening.
If the Trip Test item was selected in the Test menu, it runs the opening test.
G Test connector.
A
03:55
528.9A
L1
95.3V
U12
U12 U23 U31 L1 L2 L3 Ne
Ekip Touch protection release | 1 - Layout of the interface
ABB | SACE Emax 2
B
C
D
E
F
G