ABB | SACE Emax 2
Continued from the previous page
5. Remove the escutcheon plate of the circuit-breaker (e) by removing the screws (f) and
the protection plate (g) by removing the screw (h).
F
E
Figure 100 - Removing the escutcheon plate
G
H
Figure 101 - Removing the protection plate
Before cleaning and lubrication of the operating mechanism, you must remove the protection
release. For information about removal, see the document 1SDH001000R0523, or request the
intervention of a technician ABB.
Putting into service and maintenance | 5 - Second level maintenance
260 | © 2013 ABB | 1SDH001000R0002 - L7804