Test Menu; Information Menu - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions

Test Menu This menu allows you to access to the commands in order to perform tests.
Information menu This menu allows you to view information on:
71 | © 2013 ABB | 1SDH001000R0002 - L7804
The following table illustrates the submenus and the commands associated to the menus
Test, up to Level 3 (if present). The options corresponding to commands are underlined, to
distinguish from those corresponding to submenus.
Option
Test
Auto Test Performs a test on the display and LEDs of the interface.
Trip test Enables the opening test
• Close CB: commands the closing of the circuit-breaker.
CB test
• Open CB: commands the opening of the circuit-breaker.
• Protection S: opens a list of the test commands of the
Zone selectivity
protection.
(68) • Protection G: opens a list of the test commands of the
protection.
• Mainboard and release (serial number, model, software version, etc.).
• The circuit-breaker (serial number, rated current, configuration with or without neutral,
number of poles, fixed or withdrawable version or, state, etc).
• The connected electronic accessories (serial number, model if present, software version
if present, information on state if present, etc).
• Date and time.
Function
Information
It displays:
Protection unit • Information on Mainboard and release.
• Date and time.
Circuit-breaker
Displays information on the circuit-breaker.
Modules It displays a list of the electronic accessories connected.
• Load Input Status: shows the Open/Closed status of the
Power Controller loads.
• Load Active: shows the Active/Inactive status of the loads.
ABB | SACE Emax 2
Ekip Touch protection release | 6 - Menu