Access From The Display; Signallings - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions

Access from the display With the modules energized and Local Bus enabled, the modules can be viewed on the display.

Signallings

C
212 | © 2013 ABB | 1SDH001000R0002 - L7804
To enable the Local Bus, you need to select "On" in the menu Settings, Modules, Local Bus.
The following table illustrates the path from the display for accessing information on the
modules:
Protection unit
Circuit-breaker
Information
Modules
Power Controller
The information on the modules that can be displayed is as follows:
• The serial number and the software version.
• The MAC address, assigned by ABB and with an OUI (Organizationally Unique Identifier,
formed of the first three bytes of a MAC address, and which uniquely identifies the
manufacturer of an Ethernet device) equal to ac:d3:64.
The following table illustrates the possible signals, and their meaning:
Pos. Description
Power status LED, green. The possible states are:
• Off: power supply absent.
B
• On fixed: power supply and communication with the release present (with a
release with the Alive LED option disabled).
• On, with one flash per second (synchronized with that of the green LED on
A
the release): power supply and communication with release present (with a
release with the Alive LED option enabled).
• On, with two quick flashes per second (not synchronized with those of the
green LED on the release): power supply present, and communication with
release absent (for example, because Local Bus disabled).
Link LED, green. The possible states are:
B • Off: connection error (signal absent).
• On fixed: correct connection.
A
Activity LED, yellow The possible states are:
C • Off: no activity on the line.
• On flashing: activity present on the line (in reception and/or transmission).
...
Ekip Com Profinet
Ekip Com Profinet *R
...
Electronic accessories | 10 - Ekip Com Profinet modules
ABB | SACE Emax 2