Calculating Cip Connection - Delta AHCPU560-EN2 Series Operation Manual

E t h e r N e t / I P O p e r a t i o n M a n u a l

3.2.5 Calculating CIP Connection

Users can refer to the EIP Builder data exchange page (see below) to find out the number of CIP and TCP
connections. The method for calculating the number of CIP connection is also listed below.
_3
Series
AHRTU-ETHN-5A
AH
AH10EN-5A
AHCPU5x1-EN
AHCPU560-EN2
AS-FEN02
AS
DVPES2-E
DVP
CMC-EIP01
VFD
CMM-EIP01
3 - 6
Model
Limited to AHCPU and third-party host
1) RTU + DIO uses 1 connection
2) Each AIO or NIO module uses 1 connection
Each data exchange group uses 1 connection
1) Each data exchange group uses 1 connection
2) Execute instruction API2208 EIPRW uses 1 connection
1) If using AS series or a third-party as the host
CPU, RTU + DIO + AIO use 1 connection
2) If using AH series as the host CPU, RTU +
DIO use 1 connection, each AIO module
uses 1 connection
AS300
1) Each data exchange group uses 1 connection
2) Execute instruction API2208 EIPRW uses 1 connection
AS200
Each data exchange group uses 1 connection
DVP26SE Each data exchange group uses 1 connection
Each VFD uses 1 connection
Each VFD uses 1 connection
Method to Calculate CIP Connection
Adapter
.
Scanner
Do not support
Do not support
Do not support
Do not support
Do not support
Do not support