Ethernet Link Object (Class Id: 16#F6) - Delta AHCPU560-EN2 Series Operation Manual

Et h er N et / I P O p er a ti o n Ma n u a l
Instance
Attribute
16#06
※1 Interface Status
Status
0 The Interface Configuration attribute has not been configured.
The Interface Configuration attribute contains valid configuration obtained from BOOTP, DHCP or
1
non-volatile memory.
2 The Interface Configuration attribute contains valid configuration obtained from hardware.
※2 Interface Capability Flags
Bit
0 BOOTP Client
1 DNS Client
2 DHCP Client
3 DHCP-DNS Update
4 Configuration Settable
5 Hardware Configurable
6 Interface Configuration Change Requires Reset
※3 Interface Configuration Control
Status
The device shall use the interface configuration values previously stored (for example, in non-volatile
0
memory or via hardware witches).
1 The device shall obtain its interface configuration values via BOOTP.
2 The device shall obtain its interface configuration values via DHCP upon start-up.

8.11 Ethernet Link Object (Class ID: 16#F6)

It maintains link-specific counters and status information for an IEEE 802.3 communications interface.

Service Code
_8
Service
Code
16#01 Get_Attributes_All
16#0E Set_Attribute_Single
16#4C Get_and_Clear
8 - 2 0
Access
Name
Rule
Host Name Get/Set
Service Name
Class Attribute
Data Type Values
STRING AH10EN-5A
Description
Description
Description
Support
Instance Attribute
X V
V V
X V
Description
Device name
AH10EN-5A: "AH10EN-5A"
AHRTU-ETHN-5A:
"AHRTU-ETHN-5A"
AHCPU511-EN: "AHCPU511-EN"
AHCPU521-EN: "AHCPU521-EN"
AHCPU531-EN: "AHCPU531-EN"
Description
Returns a predefined listing of this
objects attributes
Write one attribute
Clear the contents of the attribute
Once the attribute is read.
For devices that support Instance
Attribute 4 or 5, this service code
Get and Clear will be available.