Delta AHCPU560-EN2 Series Operation Manual page 48

E t h e r N e t / I P O p e r a t i o n M a n u a l

Length

Property
 I/O Mapping Table
Delta EIP devices provide I/O mapping table. If needed, users can use the table to edit the parameters.

Connection

In

Out

Name
_4

Value
 Property
4 - 2 4
Name
Set up the data mapping length; unit: byte, the maximum is 500 byte.
Set up the advanced data mapping parameters.
Name
Select the connection from the drop down list. Different connection
might have different mapping parameters.
Input the mapping parameters. The column No. states the maximum
number of mapping parameters to input. Double-click the column
Name to open the mapping table to edit.
Output the mapping parameters. The column No. states the maximum
number of mapping parameters to output. Double-click the column
Name to open the mapping table to edit.
The parameter name; double-click the column Name to open the
mapping table to edit.
Values; after editing and downloading the values will be stored in the
Scanner. When the connection is established, the values will be
written to the Adapter.
1
2
3
4
Definition
Definition