Delta AHCPU560-EN2 Series Operation Manual page 36

E t h e r N e t / I P O p e r a t i o n M a n u a l
2.1 AHCPU5x1-EN
◆
Double-click the device you'd like to change its IP address receiving mode.
◆
Set up the IP address under the Ethernet Basic tab.
◆
Make changes on the items that you'd like to change their IP address receiving modes and click OK to
confirm the settings.
_4
3. Download the HWCONFIG
◆
Refer to section 4.1.1 for the related information.
4. Open the EIP Builder
◆
Refer to section 4.1.1 for the related information.
5. Open the IP Manager
◆
Refer to section 4.2.2 for the related information.
6. Open the IP setup page
◆
Refer to section 4.2.2 for the related information.
4 - 1 2