Delta AHCPU560-EN2 Series Operation Manual page 40

E t h e r N e t / I P O p e r a t i o n M a n u a l

Operation Steps:
1. Add new devices in (scan the network): Click the setup button to bring out the communication
set up page.

Once your PC is connected to the EIP Scanner, there are 3 ways to set up the network
communication.
_4
(a)
(b)
(c)
4 - 1 6
Select the created Driver: Select the created driver from the COMMGR Driver drop down list.
Edit the created Driver: Click the setup button in the Common Setting section to bring out the
Driver Properties to edit.
Add a new Driver: Click the setup button+ in the Common Setting section to bring out the
Driver Properties to add new Driver.
(c)
(b)
(a)