Delta AHCPU560-EN2 Series Operation Manual page 70

Et herNet / I P O perat i on Manual
3. Right click on the EtherNet/IP Table (Produced TAG) to see the context menu and select the option "Add
a Symbol". And then an Add Symbol window will appear.
4. Set up the Consumed TAG: as the example shown below.
Identifier
Address
Type
Initial Value
Comment
_5
5. TAGs can be used in the data mapping table. Refer to section 4.4 for more information on data mapping.

Add Symbol window
5 - 1 0
Freq
D100
WORD
--
VFD Frequency - Station 1
Status
D100
WORD
--
PLC Running S