Delta AHCPU560-EN2 Series Operation Manual page 56

E t h e r N e t / I P O p e r a t i o n M a n u a l
_4

Descriptions for the EIP Builder:
1 Information: Rack 1
2 Slot number
3 Label
4 MDS Version
5 Description
6 Input Device Range
7 Output Device Range
Requested Packet Interval
8
(RPI)
9 Multicast
10 Timeout
11 Trigger mode
12 Connection type

Operation Steps:
4 - 3 2
Name
Information of the rack 1
Slot number of rack 1 (power module and AHRTU module are excluded)
Module Name
Device firmware version
Device description
The input devices assigned to a module are displayed here
The output devices assigned to a module are displayed here
RPI setting value; unit: mm
Only analog I/O modules and special modules need to set the RPI time
to renew data; for other digital I/O modules, data can be renewed
according to the RPI time set for the AHRTU-ETHN-5A.
Communication mode setup: Multicast or Point-to-Point
Timeout setup; set up the timeout time according to the RPI or the
multiple of RPI (RPI*X).
Renew data according to the set RPI time
Owner or Listen only
R TU
HW CON FIG
Ad d
I/O mod ul e p ara mete rs
Description
Set up
Do wn lo ad