Delta AHCPU560-EN2 Series Operation Manual page 33

3. Set up the IP address

Select and double-click the listed address to open the IP setup page.

Type the IP address.
4. Disable DHCP/BOOTP

Click to select the device in the Mapping Table that you'd like to disable its DHCP/BOOTP function and
then click the Disable DHCP/BOOTP button. After that the selected device will not send DHCP/BOOTP
requests. For the modification on the IP address receiving mode, refer to section 4.2.4 for more
information.
C ha pt er 4 E I P B u il der
4 - 9
4_