Delta AHCPU560-EN2 Series Operation Manual page 66

Et herNet / I P O perat i on Manual
IP1
IP2
Mode
SerCode
ClassId
InstId
AttrId
Size
Data
When the function blocks are executed successfully, the output parameters will be stated as below.
Parameter
Don
Error
ErrCode
Value
_5
When the function blocks are not executed successfully, the output parameters will be stated as below.
Parameter
Don
Error
ErrCode
Value
The Error bit is On and the ErrCode=16#1401 (The I/O module appears to have an read/write error.)
Don and Value are shown with no output. No other FBs are used.
5 - 6
16#C0A8 IP address: 192.168.1.10
16#010A
16#01 Create a CIP connection and close the
connection after the transmission is
done.
16#10 Write a single one Attribute
16#9D Class ID = 9D
16#02 Instance ID = 2
16#01 Attribute ID =1
16#02 Target parameter type: 2Bytes
16#01 Parameter value: 16#01
Output
Settings
ON (16#01) Complete
No output No error
16#00 No error
No output No output
Output
Settings
No output No output
ON (16#01) Error
16#0E Cannot write the attribute
No output No output
Description
Description