1. Add an I/O module
Add the I/O modules according to the real placement by dragging the modules on the left hand side to the
right side of the RTU module. Make sure the slot assignment is the same as the real placement.
2. Setting parameters
The system automatically assigns devices to a module so that the data in the module can be stored.
The devices assigned to a module are displayed in the Input Device Range cell and the Output
Device Range cell.
Click the ... in the "Input Device Range" and "Output Device Range" column to edit the ranges.
C ha pt er 4 E I P B u il der
4 - 3 3
4_