Advertisement
Assembly Instruction
1. Unscrew the fixed screws with a screwdriver, and remove the block, as shown in figure:
Fixed screw
2. Install the small converters to the slots, as shown in figure:
3. Fix the block to the MSP rack with fixed screws, as shown in figure:
Fixed screw
4. Connect one end of the DC power cord to the DC 12V power interface of the MSP rack and the other
end to the power interface of the small converter, as shown in figure:
6
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Fax: 00865925788216
Email: sales@rgblink.com
http://www.rgblink.cn
Advertisement
