Power On; Quit - Compaq AlphaServer DS10 Reference Manual

4.14.11 power on

The power on command is equivalent to turning on the system
power from the control panel.
If the system is already powered on, this command has no effect. After the
power on command is issued, the user's terminal exits the RMC and
reconnects to the system's COM1 port.
Syntax: power on
Example:
TI94„ƒ‘s†Âƒ‚
Tsˆ‰†‚w‚uˆƒÂ9QI„ƒ†ˆ
The power on command does not turn on the system if the Power button on the
control panel is in the OFF position. Check the Power button if you issue the
power on command and receive the following message:
TI94„ƒ‘s†Âƒ‚
Biw€srˆƒÂ„ƒ‘s†Âƒ‚

4.14.12 quit

The quit command exits RMC from a serial terminal and returns
the user's terminal to the system's COM1 port.
You must enter the entire word for the command to take effect.
Syntax: quit
Example:
TI94Â…‰wˆ
Tsˆ‰†‚w‚uˆƒÂ9QI„ƒ†ˆ
4-28 DS10 Console Reference