Installing Windows Nt - Compaq AlphaServer DS10 Reference Manual

1.8

Installing Windows NT

Windows NT is installed from the CD-ROM. Insert the CD-ROM
into the drive, start AlphaBIOS Setup, select the menu item
Install Windows NT, and follow the prompts.
Figure 1–5 Installing Windows NT
7€„vi8EQUÂUsˆ‰„
@w‡„€i“ÂU“‡ˆs
7€„vi8EQUÂW„u†irs|
Di†rÂ@w‡yÂUsˆ‰„|
9IQUÂUsˆ‰„|
Psˆ‘ƒ†yÂUsˆ‰„|
E‚‡ˆi€€ÂYw‚rƒ‘‡ÂPV
Wˆw€wˆws‡ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
7pƒ‰ˆÂ7€„vi8EQU|
R†s‡‡ÂAPVATˆƒÂw‚‡ˆi€€ÂYw‚rƒ‘‡ÂPV
AU9 3ÂA’wˆ
The Halt/Reset jumper on the motherboard must be set to the Windows NT
position for the Halt button to operate (see Section 1.12). If the Halt/Reset
jumper is set in the OpenVMS/Tru64 UNIX position, the Halt button will be
ignored by the Windows NT operating system and have no effect. Properly set,
the Halt button will initiate a system reset.
DS10 Console Reference
1-22
8
B!3ÂDs€„