Halt/Reset Button; Halt/Reset Button Function Under Operating Systems - Compaq AlphaServer DS10 Reference Manual

Figure 4–6 Halt/Reset Button
Table 4–3 Halt/Reset Button Function under Operating Systems
Operating System
OpenVMS and
Tru64 UNIX
Windows NT
The Halt button, however, does not override the halt {in, out} commands. If
you halt the system with halt in, you must use halt out to deassert the halt
state.
When you issue either the halt in or halt out command under OpenVMS or
Tru64 UNIX, the terminal exits the RMC and reconnects to the system's COM1
port.
TI94Âvi€ˆÂw‚
Tsˆ‰†‚w‚uˆƒÂ9QI„ƒ†ˆ
TI94Âvi€ˆÂƒ‰ˆ
Tsˆ‰†‚w‚uˆƒÂ9QI„ƒ†ˆ
Function
Suspends the operating system and
returns control to the SRM or RMC console.
Resets the system.
Remote Management Console
PK1043c
4-11