Compaq AlphaServer DS10 Reference Manual page 139

Exit (Escape key) — Return to the AlphaBIOS Setup screen.
An express hard disk setup creates the recommended partition arrangement on
the first hard disk (disk 0). It does not, however, format the large partition with
NTFS, and it does not map bad sectors on the disk. The NTFS formatting can be
done once Windows NT has been installed.
To perform an express hard disk setup
1. If you have any needed information on your disk, back it up before
proceeding.
2. Start AlphaBIOS Setup, select Hard Disk Setup, and press Enter.
3. Press F7 to enter Express Setup.
4. Press F10 to continue with the setup.
AlphaBIOS Console 3-23