Show Commands; Show Config - Compaq AlphaServer DS10 Reference Manual

2.3

Show Commands

Several commands are used to display the system configuration:
show config, show cpu, show device, show memory, show
network, show pal, show power, and show version.
2.3.1

Show Config

The show config command displays a list of devices found on the
system interconnect and I/O buses. This is the configuration at
the most recent initialization.
Syntax: show config
Example 2–1 Show Config Command
>>> show config
AlphaServer DS10 466 MHz
SRM Console: V5X-XXX
PALcode: OpenVMS PALcode V1.56-45, Tru64 UNIX PALcode V1.50-48
Processors
CPU 0 Alpha 21264-4 466 MHz
Bcache size: 2 MB
Core Logic
Cchip DECchip 21272-CA Rev 2
Dchip DECchip 21272-DA Rev 2
Pchip 0 DECchip 21272-EA Rev 2
TIG Rev 2.1
Arbiter Rev 3.30 (0x7E)
MEMORY
Array # Size
------- ----------
0 256 MB
Total Bad Pages = 0
Total Good Memory = 256 MBytes
PCI Hose 00
Bus 00 Slot 01: Acer Labs M1543C USB
Bus 00 Slot 03: Acer Labs M1543C PMU
Bus 00 Slot 07: Acer Labs M1543C
Bus 00 Slot 09: DE500-BA Network Controller
2-8 DS10 Console Reference
SROM Revision: V1.8.208
Base Addr
---------
000000000
ewa0.0.0.9.0
Bridge to Bus 1, ISA
08-00-2B-86-1B-BA