Description of the CMM
Probe system
Probing
Holding + securing
2-14
Probe system types
The CenterMax is equipped with the VAST probe system.
Application
Measuring principle
Further information
Components of a probe system
The probe system comprises:
Probe head
Adapter plate
Probe stylus
Functions of the components
The
probe
is used for probing the workpiece. One or more probes are
mounted on the adapter plate. The adapter plate and the probe form
a single unit.
The
adapter plate
is used to hold one or more probes and fasten
them to the probe head. Proper fastening is ensured by means of a
three-point bearing. The adapter plate is held by a magnet integrated
in the adapter plate receptacle of the probe head.
A pin located on the adapter plate receptacle is mated to a recess on
the edge of the adapter plate. The adapter plate must be inserted in
the adapter plate receptacle so that the pin fits into this recess.
61211-1020202
CenterMax Operating Instructions
VAST
Universal
measuring
➤
page 2-15
VAST
×
×
×