Zeiss CenterMax Operating Instructions Manual page 151

!
hss
NOTE
• Rinse the probe elements immediately with water and dry them.
Danger!
Caustic solvents may represent a health hazard. When using caustic
solvents, always take protective measures, e.g. wear rubber gloves
and safety eyeglasses.
• Observe the general protective measures when handling harmful
solvents.
Whenever the styli are not in use, store them in a safe place, ideally in
the probe kit.
Calibration sphere
The calibration sphere must be clean and in perfect condition to
ensure correct calibration.
• Clean the calibration sphere with a fluff-free cloth.
• Use a cleaning agent if required.
Make sure that the probe element is free from cleaning agent resi-
dues.
Adapter plate
The adapter plate must be protected against soiling.
• Store the adapter plate in a dust-free and clean place, e.g. in a
cabinet or drawer, whenever it is not in use.
Cleaning:
Wipe off the adapter plate with a dry or damp cloth. Dry the adapter
plate in order to avoid oxidation of its contacts.
If the adapter plate is dirty:
• Clean it with a mild cleaning agent.
• Then dry it.
Make sure that the adapter plate is free from cleaning agent residues.
The function of the adapter plate could otherwise be adversely
affected.
Probe head
The adapter plate and the adapter plate receptacle must be protected
against soiling.
• Put a protective cap on the adapter plate receptacle of the probe
head whenever no probe is inserted in the adapter plate receptacle
or the probe head is not in use.
61211-1020202 CenterMax Operating Instructions
Care
9-7