Description Of Menu-Reset Functions - Ikegami HQLM-3120W Operation Manual

HQLM-3120W

4-15 Description of MENU-RESET Functions

Executing the initialization of setup data
Perform this setting to restore the default set-
tings.
ALL Factory settings are restored for
all PRESET data, all MENUs
and switches.
PRESET Factory settings are restored for
all PRESET data.
MENU&SW Factory settings are restored for
all MENUs and switches.
To initialize, select an item to be initialized with
the RE and press the RE . The confirmation
message appears. Press the RE again. To cancel
the initialization, just press the ESC switch.
* The initialization of data cannot be executed if
PRESET LOCK
"MENU-SYSTEM LOCK-UTILITY".
To initialize the data, unlock the settings.
Default setting is ALL.
or ALL LOCK is set in
Selecting the preset files to be initialized
When "PRESET" is selected in
for restoring the setup data to the facto-
ry-settings.
ALL All the preset files are initialized.
FILEx FILEx only is initialized.
(x:1 to 8)
FILE1-8 FILE1 to FILE8 only are initial-
ized.
D65 REF D65 only is initialized.
D93 REF D93 only is initialized.
D65/D93 REF D65 and D93 only are ini-
tialized.
ACES REF ACES only is initialized.
DCI P3 REF DCIP3 only is initialized.
Default setting is D65.
- -
46
, select a file