Update Of Firmware - Ikegami HQLM-3120W Operation Manual

31-inch 4k/hd multi format lcd monitor
Table of Contents

Advertisement

HQLM-3120W

Update of firmware

Updating the firmware is possible by the USB
memory.
MAIN MPU
When updating the MAIN MPU firmware, put a
check mark here.
Specified file name 3120vxxx.bin
SUB MPU
When updating the SUB MPU firmware, put a
check mark here.
Specified file name 3120sxxx.bin
FILE NAME 3120 v xxx . bin
Model information
3120 : HQLM-3120W
Identification information
v
for MAIN MPU
s
for SUB MPU
Version information
Exampl 3120v105.bin
Extension (bin)
FPGA1
When updating FPGA1, put a check mark here.
Specified file name 3120fxxx.f1b
FPGA2
When updating FPGA2, put a check mark here.
Specified file name 3120fxxx.f2b
When updating FPGA3, put a check mark here.
Specified file name 3120fxxx.f3b
FILE
Updating
The selected items with a check mark in items
through
Updating process requires approximately 0.5 to 20
minutes, depending on the USB performance and
the selected items.
Updating of only SUB MPU requires nine minutes.
If updating SUB MPU is not necessary, deselect-
ing can reduce the required time.
Confirm that the file names specified in items
Ver1.05
through
If a specified file for the selected item does not
exist, an error is displayed, and updating stops.
After upgrading, confirm that the version is
properly upgraded by checking the version num-
ber in "MENU - INFO."
- -
42
FPGA3
3120 f xxx . f1b
Model information (fixed to 3120f)
Version information
Example 3120f 105
Extension
FPGA1
f1b
FPGA2
f2b
FPGA3
f3b
are updated by EXECUTE.
exist in the root in the USB memory.
Ver1.05

Advertisement

Table of Contents
loading

Table of Contents