Ikegami HQLM-3120W Operation Manual page 75

Additional user-set functions
Functions in "Pin function in the default condition" described in the preceding section and the following func-
tions can be allocated to any desired pin.
Pin No. Function
User setting SHADOW0 on
User setting SHADOW20 on
User setting SHADOW40 on
User setting SHADOW60 on
User setting U.MRK SCENE01
User setting U.MRK SCENE02
User setting U.MRK SCENE03
User setting U.MRK SCENE04
User setting U.MRK SCENE05
User setting U.MRK SCENE06
User setting U.MRK SCENE07
User setting U.MRK SCENE08
User setting U.MRK SCENE09
User setting U.MRK SCENE10
User setting VIEW 4K
User setting VIEW 2K
User setting VIEW MULTI
User setting EOTF:HLG1
User setting EOTF:HLG2
User setting EOTF:PQ
User setting EOTF:LOG1
User setting EOTF:LOG2
User setting EOTF:2.2
User setting EOTF:2.4
User setting EOTF:2.6
User setting CS:AUTO
User setting CS:BT.2020
User setting CS:BT.709
User setting CS:DCI P3 D65
User setting CS:DCI P3
User setting CS:ACES
User setting CS:ADOBE RGB
User setting CS:PANEL
User setting CS:LOG G1
User setting CS:LOG G2
User setting YM:AUTO
User setting YM: BT.2020
User setting YM: BT.709
User setting V:4K-CH-B1/2/3/4
User setting V:4K-HDMI
User setting V:2K-CH-A1
User setting V:2K-CH-B1
User setting V:2K-CH-B2
User setting V:2K-CH-B3
User setting V:2K-CH-B4
User setting V:2K-HDMI
User setting V:MULTI-SDI ONLY
User setting V:MULTI-SDI/HDMI
* The functions of pins other than 1 are freely user-settable in the MENU.
* When SCENE 01 ~ 10 of USER MARKER is set with multiple pins, lower numbers are given priority.
For example, when both SCENE 01 and SCENE 03 are ON, SCENE 01 takes precedence.
* See also the text "4-10. MENU - P.REMOTE function explanation".
* If you assign the function to select the input channel to the pin, the last channel turned on will be valid.
At that time, please be sure to turn off other input channel selection terminals at the same time.Also, if all
input channels are turned off, the input of the last input channel turned on will be displayed as it is.
External Assignment for Function
Connect to Pin 1 for running with shadow level 0% (black).
* Priority is given to this pin function if any other shadow setting pin is pressed at once.
Connect to Pin 1 for running with shadow level 20%.
Connect to Pin 1 for running with shadow level 40%.
Connect to Pin 1 for running with shadow level 60%.
Connect to Pin 1 to set USER MARKER (SCENE01) to on. It turns off when the connection is opened.
Connect to Pin 1 to set USER MARKER (SCENE02) to on. It turns off when the connection is opened.
Connect to Pin 1 to set USER MARKER (SCENE03) to on. It turns off when the connection is opened.
Connect to Pin 1 to set USER MARKER (SCENE04) to on. It turns off when the connection is opened.
Connect to Pin 1 to set USER MARKER (SCENE05) to on. It turns off when the connection is opened.
Connect to Pin 1 to set USER MARKER (SCENE06) to on. It turns off when the connection is opened.
Connect to Pin 1 to set USER MARKER (SCENE07) to on. It turns off when the connection is opened.
Connect to Pin 1 to set USER MARKER (SCENE08) to on. It turns off when the connection is opened.
Connect to Pin 1 to set USER MARKER (SCENE09) to on. It turns off when the connection is opened.
Connect to Pin 1 to set USER MARKER (SCENE10) to on. It turns off when the connection is opened.
Connect to Pin 1 to switch the VIEW MODE setting to 4K.
Connect to Pin 1 to switch the VIEW MODE setting to 2K.
Connect to Pin 1 to switch the VIEW MODE setting to MULTI.
Connect to Pin 1 to switch the EOTF setting to HLG1.
Connect to Pin 1 to switch the EOTF setting to HLG2.
Connect to Pin 1 to switch the EOTF setting to PQ.
Connect to Pin 1 to switch the EOTF setting to LOG1.
Connect to Pin 1 to switch the EOTF setting to LOG2.
Connect to Pin 1 to switch the EOTF setting to 2.2.
Connect to Pin 1 to switch the EOTF setting to 2.4.
Connect to Pin 1 to switch the EOTF setting to 2.6.
Connect to Pin 1 to switch the COLOR SPACE setting to AUTO.
Connect to Pin 1 to switch the COLOR SPACE setting to BT.2020.
Connect to Pin 1 to switch the COLOR SPACE setting to BT.709.
Connect to Pin 1 to switch the COLOR SPACE setting to DCI P3 D65.
Connect to Pin 1 to switch the COLOR SPACE setting to DCI P3.
Connect to Pin 1 to switch the COLOR SPACE setting to ACES.
Connect to Pin 1 to switch the COLOR SPACE setting to ADOBE RGB.
Connect to Pin 1 to switch the COLOR SPACE setting to PANEL.
Connect to Pin 1 to switch the COLOR SPACE setting to LOG G1.
Connect to Pin 1 to switch the COLOR SPACE setting to LOG G2.
Connect to Pin 1 to switch the YCbCr Matrix setting to AUTO.
Connect to Pin 1 to switch the YCbCr Matrix setting to BT.2020.
Connect to Pin 1 to switch the YCbCr Matrix setting to BT.709.
Connect to Pin 1 to switch the input (4K mode) setting to CH-B1/2/3/4(Quad Link).
Connect to Pin 1 to switch the input (4K mode) setting to HDMI.
Connect to Pin 1 to switch the input (2K mode) setting to CH-A1.
Connect to Pin 1 to switch the input (2K mode) setting to CH-B1.
Connect to Pin 1 to switch the input (2K mode) setting to CH-B2.
Connect to Pin 1 to switch the input (2K mode) setting to CH-B3.
Connect to Pin 1 to switch the input (2K mode) setting to CH-B4.
Connect to Pin 1 to switch the input (2K mode) setting to HDMI.
Connect to Pin 1 to switch the input (MULTI mode) setting to CH-B1, CH-B2,
CH-B3 and CH-B4.
Connect to Pin 1 to switch the input (MULTI mode) setting to CH-B1, CH-B2,
CH-B3 and HDMI.
- 65 -
HQLM-3120W