Ikegami HQLM-3120W Operation Manual page 33

Setting the aspect marker shadow level
Used to set the contrast level of the aspect marker
shadow, when displayed.
Settings: 0%, 20%, 40% and 60%
Default setting is 40%.
Setting the center marker ON(TYPE-A/B)/OFF
Used to turn on and off the center cross marker.
There are two kinds of center markers TYPE-A or
TYPE-B.
Default setting is OFF.
OFF TYPE-A
Setting the marker display level
Used to set the marker display level.
Settings: 20%, 40%, 60%, 80% and 100%
Default setting is 80%.
Setting the marker display color
Used to set the marker display color.
* The marker is displayed in the color preset on
the marker menu.
Settings White, yellow, cyan, green, magenta,
red and blue
Default setting is white.
Setting the user marker display ON/OFF
Used to turn on and off the user marker display.
This function can be assigned to a function
switch on the front panel.
Default setting is OFF.
Selecting each scene of user markers and set-
ting the scene names
The user markers can be set for up to 10 scenes;
you can select from SCENE 1 to SCENE 10.
SCENE10
SCENE2
SCENE1
The name of each scene can be up to 8 characters in
length with the following characters: "0-9, A-Z, (),
-, □ (blank)".
If you press ENT on the SCENE, the following
SETTING MENU is displayed, and there you can
change the name of each SCENE.
TYPE-B
<SCENE NAME>
NO.1
SCENE1
NO.2 SCENE2
NO.3 SCENE3
NO.4 SCENE4
NO.5
SCENE5
NO.6 SCENE6
NO.7 SCENE7
NO.8 SCENE8
NO.9
SCENE9
NO.10
SCENE1 0
RETURN
The switching of the scenes can be assigned to a
function switch on the previous screen.
Default setting is SCENE1.
Setting User Markers
Press RE with EXECUTE, and the user mark-
ersetting menu shows up. Now various settings
can be made in this menu.
For details, refer to Item "4-7. Description of
MENU-USER MARKER Functions and Setup".
- -
23
HQLM-3120W
<SCENE NAME>
NO.1 ABCDEFGH
NO.2
SCENE2
NO.3 SCENE3
NO.4 SCENE4
NO.5 SCENE5
NO.6
SCENE6
NO.7 SCENE7
NO.8 SCENE8
NO.9 SCENE9
NO.10 SCENE1 0
RETURN