Applicable Standards; Functions - Ikegami HQLM-3120W Operation Manual

7-4 Applicable Standerds
(1) Safety standards
UL60950-1
EN60950-1
(2) Electromagnetic interface
VCCI (Class-A)
FCC (Class-A)
EN55032 (Class-A)
EN55103-2 E4
(3) Specific chemical substance regulation
RoHS Directive compliance
(4) Confirmation of HDMI ATC testing
HDMI CTS version 1.4b and 2.0u

7-5 Functions

(1) Front operation
a) Switch
POWER ON/OFF MONO APT SCREEN
MARK F1 F2 F3 F4 MENU
PRESET ENT ESC
UP/DOWN/LEFT/RIGHT INPUT SELECT
CH B TEST
b) Variable Control
CHROMA, BRIGHTNESS,
AUDIO
c) Rotary encoder
Various settings
(2) Marker function
a) Center marker
(Set to ON/OFF using the MENU)
b) Safety marker
Any of the following markers is displayed
according to the image aspect ratio.
<Types>
Safety area marker
"Safety area marker" + 100 %
The "safety area markers" are effective
over the entire screen and can be preset
in 1 % increments in the range of
80-99 %.
5 divided crosshatch
10 divided crosshatch
Cross
16:9 aspect marker
15:9 aspect marker
14:9 aspect marker
13:9 aspect marker
4:3 aspect marker
1.85:1 aspect marker
2.35:1 aspect marker
"Each aspect marker" + "Safety marker
in aspect"
<Marker level>
(3) Shadow function
Creates a shadow outside the aspect areas
with 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1 and
2.35:1.
<Types>
(4) User marker function
CONTRAST,
Function for the user to draw their desired lines
and boxes in the unit of pixels.
a) No. of types: 10 scenes x 12 types (1 scene: 12
b) No. of colors: 7
c) Drawable sizes: 4096x2160 pixels
d) Drawing method: RE or USB mouse
*
(5) UMD/IMD display with TSL protocol
Character display function controlled by RS485.
Either TSL or user display should be selected for
the UMD/IMD display (MENU selection).
a) Standard: RS485
b) Connector: R J-45 (loop through)
c) Number of connections: up to 32 devices (per
d) Protocol: TSL UMD V3.1
e) Characters: ASCII (alphanumeric), up to 8
f) TALLY display: Red/Green/Amber
g) Display in the screen or LED display
- 57 -
The "safety marker in aspect" refers to
the safety marker with respect to the
aspect marker display zone, and can be
preset in 1 % increments in the range of
80-99 %.
Corresponding to each aspect marker.
Set in five steps of 20 %, 40 %, 60 %, 80 % and
100 %
"Various aspect markers" + "Shadow"
"Various aspect markers" + "Safety marker
in aspect" + "Shadow"
Shadow only
<Shadow contrast level>
Set in four steps of 0 %, 20 %, 40 % and
60 %.
types)
Patent acquisition
line)
characters, 7 colors
Display position: Top/bottom
HQLM-3120W