Labeling Keys - Siemens SIMATIC KP8 Operating Instructions Manual

PROFINET interfaces
There are two LEDs on each PROFINET interface. These LEDs display the status of the
PROFINET communication. The following table shows the meaning:
5.3

Labeling keys

You can label the keys as required for your project. Use the labeling strips for this purpose.
When installed, the labeling strips can be inserted if the mounting has a material thickness of
< 3.5 mm. With larger material thicknesses, the disassembly of the HMI device is required if
a labeling strip should be changed.
Note
Do not write on the keyboard to label the function keys.
Printing labeling strips
A template for the labeling strips is available as a Word file online under:
KP8, KP8F
Operating Instructions, 10/2010, A5E03284305-01
Green LED Yellow LED
LINK RX/TX
OFF OFF
On OFF
On On
Meaning
No PROFINET connection
PROFINET communication possible
PROFINET communication runs
Operator controls and displays
5.3 Labeling keys
55