Procedure
1. Double-click in the station window on the marked device.
2. Select the "Shared" tab.
3. In the "Devices which can be coupled" group, select the device to be coupled to the
4. Click "Couple".
5. If you want to decouple a Shared Device connection, select the device in question.
6. Click "Uncouple".
KP8, KP8F
Operating Instructions, 10/2010, A5E03284305-01
In the following image, the module to be configured is labeled in red.
The following dialog appears.
The buttons are gray as long as no device is selected.
KP8F.
The Shared Device connection is established. The coupled device is displayed in the
"Coupled devices" group. See red marking.
The Shared Device connection is terminated. The decoupled device is displayed in the
"Devices which can be coupled" group.
Setting the KP8 and KP8F
6.7 KP8F – Configure Shared Device
69